VALVES - VALVE GUIDES
 |
STAINLESS STEEL VALVES - $37.44
APE
is a leading supplier of high performance and racing valves for
motorcycles. APE stainless steel valves are precision manufactured
from aircraft quality Inconel based stainless steel. This special
material offers excellent resistance to heat and distortion.
APE stainless steel valves are designed to be used in the most
extreme racing applications including the use of exotic fuels,
or will give many miles of trouble free street use. They present
an outstanding value. In most cases you can upgrade to APE stainless
steel valves for less than the cost of replacement stock valvws. All stainless steel valves feature hard chrome stems
for extra long stem to guide life.

1000J / GPZ1100
| 98003 |
Exhaust |
32 mm |
Std Size |
| 980008 |
Exhaust |
33mm |
max stock seat |
| 98004 |
Exhaust |
33 mm |
Blank |
| 98001 |
Intake |
38.6
mm |
Max
stock seat |
| 98039* |
Intake |
38.6
mm |
Blank |
| 980105* |
Intake |
40
mm |
Blank |
| 98002* |
Intake |
42
mm |
Blank |
| 980072* |
Intake |
44
mm |
Blank |
|
|
|
900 / 1000 thru 1980 7 mm stem
(Radius groove)
| 98803 |
Exhaust |
30 mm |
Std size |
| 98014 |
Exhaust |
31 mm |
max stock seat |
| 980008* |
Exhaust |
33mm |
3.512" oal |
| 98004* |
Exhaust |
33 mm |
Bank stem |
| 98802 |
Intake |
36 mm |
Std size |
| 98020 |
Intake |
37.5mm |
.055" Short - allows installation with adequate valve-to-valve clearance |
| 98015 |
Intake |
37.5mm |
max
stock seat |
| 98039* |
Intake |
38.6mm |
Bank
stem |
| 980072* |
Intake |
44mm |
Bank
stem |
900 / 1000 / GPZ1100 Titanium - $124.50 ea.
| TE33-70 |
Exhaust |
33 mm |
Blank |
| TE35-70* |
Exhaust |
35 mm |
Blank |
| TE38-70* |
Exhaust |
38mm |
Blank |
| TI42-70* |
Intake |
42 mm |
Blank |
| TI44-70* |
Intake |
44 mm |
Blank |
| TI46-70* |
Intake |
46
mm |
Blank |
| TI48-70* |
Intake |
48 mm |
Blank |
|
 |
HIGH PERFORMANCE BRONZE VALVE GUIDES
APE valve guides are designed to take the
abuse of today's modern high horsepower engines. They are made
from special bronze alloy to resist wear and heat. No other valve
guide that you can buy will out-perform APE guides. Fact is we
supply our guides to nearly all of the top cylinder head shops.
Major police departments use them in their patrol bikes which
see severe use.
APE guides are precision machined with
the bores finished to size.
They are designed to fit lower in the head to clear high lift
cams, and use APE seals or factory OEM seals. Sold in sets of
8.
| #VGK900 |
Kawasaki 650 thru 1100 2 valve |
112.34 |
| #99101-4 |
Specials
Kawasaki Z1 / KZ1000 / GPZ1100 .004" oversize. |
9.54 ea |
| #99101-25 |
Kawasaki Z1/KZ1000/GPZ1100 .027" oversize
repair guide (.502 dia) |
17.50 ea |
|
 |
HEAD
SAVER KIT - $79.95

The
Racetoolz head saver kit is designed to repair damaged valve
guide holes in Kawasaki KZ650 through GPZ1100 2 valve cylinder
heads. Damage can occur when old guides are driven out with carbon
on them, valves run into each other, breaking and moving the
guide, cracking the guide boss which requires welding. Whatever
the case, the head saver kit will ream a new oversize hole on
center of the tappet bore. Then install one of the special guides
that come in the kit, and it is fixed. Touch up the seat and
it is back in service. The reamer opens the hole .025" which
should be more than enough to clean up the most severely damaged
guide hole. Quit scraping these heads because of valve guide
hole damage. Every shop that works on KZ cylinder heads should
have this kit.
Each kit includes one head-saver bushing, one reamer, set screw
(to easily lift the bushing from the tappet bore) and two +.027
oversize bronze valve guides.
Head Saver Kit - #HS100K $79.95(order this part online!)
Replacement oversize valve guides - #99101-25 - $17.50 ea. (order this part online!) |
 |
APE VALVE
STEM HEIGHT GAUGE - 
APE precision
valve stem height gauge for Kawasakis 650 thru 1100 2 valve motors
allows you to set the valve stem height so that it will fall
into the middle of the shim range. A must when doing valve jobs,
installing big valves, or working with cams that have reduced
base circles.
$24.50 ea.
| #VHG1080 |
1.080" Base circle |
| #VHG900 |
.900" Base circle |
VHGZ11WEB Special height for Kawasaki ZX10 /
11 for using Web reduced base circle cams.
VALVE GUIDE INSTALLATION |
|
VALVE KEEPERS

Sets of 8
pair - Radius Groove
Short KZ radius style keepers. These keepers are .054" lower than OEM so there is no chance that tipping the valves will result in the shim resting on the keepers instead of the valve..
| PART# 21-604-S |
short -- set of 8 |
$64.95 |
| PART# 21-604 |
not short -- OEM replacement LIMITED TO STOCK ON HAND |
$49.95 |
|
 |
VALVE GUIDE SEALS
APE
seals are the best available. Won't dry out and crack. Keeps the oil out of the motor for maximum performance.
Insist on the best.....
| 99199 |
650 thru
1100 2 valve |
$19.11 |
|
|